All Products

Screw-in 'MX/Cherry-style' PCB mount stabilizers. Comes as "pre-clipped", meaning the bottom stem is flush, so no need to clip the feet.

Come with 4 x 2u wires, 1 x 6.25u wire or 1x 7u wire.

Premium Lubing Brushes

Sizes:

• Round - Size 0 or Size 2.
• Flat - Size 1. 

These premium brushes are made for long-term use and won’t fall apart halfway through a lube job. The grip is specially designed for comfort and the thin tips allow for precise and even lube application on switch parts.

As a best practice, we recommend using a separate brush for each type of lube to avoid mixing and contamination.

Round brushes are great for beginners and those who want very fine control over lubing.

Flat brushes are great for those who have great hand control and want the ability to apply more coverage with less work for specific surfaces.

Pickup and hold your stem (or gems) without getting lube on your fingers.

3D printed switch opener. Opens both 'Cherry-MX' and 'Kailh' style switches.

Current Revision 1.4 (2021-07-12)

Update 1.4 (2021-07-12):

• Updated tolerances
  
• New low-profile size for letter mail shipping

Update 1.3 (2021-03-22):

• Fixed an issue with kailh side spacing

Update 1.2 (2021-02-04):

• Otemu tops now pop out easier, angle revision

Update 1.1 (2020-11-10):

• Issue with switches being too tight fixed

Now a 100% original design, printed with maximum strength as a 3D printed product.

 

 

PC switch films by Kelowna. 

Updated from previous double layer materials. 

These switch films help reduce housing wobble and rattle between top and bottom housing. 
Info: 

• 0.13mm or 0.15
  
• Comes in packs of 120.
• Especially great for JWK switches

Krytox™ GPL 106 is high viscosity lubricating oil. Its ideally used as spring lube but has seen application on linear switches too. Its high viscosity allows it to stay adhered to springs without flowing off and pooling to the bottom of the switch housing.

Krytox™ GPL 105 medium viscosity lubricating oil. Its ideally used as spring lube but has seen application on linear switches too. Its viscosity allows it to be applied quickly and efficiently onto springs. Its also viscous enough to adhere to springs when applied in a thin enough coat.

Oils, when applied properly, can help reduce spring ping/spring crunch noises.

Each bottle approximately 5ml.

Please note that all lubricant purchases are non-returnable & non-refundable once the sale is final.

Please note that this ais a industrial product. Keyspresso is not responsible for any damages from inexperienced usage. Please do not ingest or leave on skin.

 

Springs from ThicThock. Packs of 100.
Comes in
DL - Deliciously Linear (62g, 65g, 58.5g, 55g*)
MP - Magically Progressive (64g, 68g)

MP's were originally found in the beloved marshmallow switches. Now they are available on their own- so you can experience the same fluffy feel in a switch housing of your choice!
MP - means progressive, which increases in force as you press down on the switch. This encourages the user from bottoming out. Creating a unique typing experience.

Thic Thock Springs are meticulously designed and manufactured custom mechanical keyboard springs; aiming at providing the best quality spring at a reasonable and friendly price point.

The weight variation of each spring is controlled within 2±gf. In order to maximize the customer experience, we've decided to make these amazing springs with premium custom materials: a high grade custom material imported from Japan. The structure of the spring will be firmer and more flexible, resulting in a more bouncier feel and better overall typing experience. That are specifically used for supreme user experience.

*55g springs don't have the sticker label.

*Foo dog gacha not included*

A heavy viscosity and heat-resistant grease.

Great for lubricating stabilizers. Not recommended for switches.

 

From the manufacturer:

XHT-BDZ is the highest viscosity grease in the XHT-BD Series. Krytox XHT-BD greases are designed for use where the temperatures are in the 288 °C (500 °F) range and higher, where there is a danger of melting the standard PTFE thickener. This grease uses a special non-melting high temperature thickener. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox XHT-BD greases are for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 330 °C (626 °F), and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life.

A favorite from the Giant series of switches, known for their great pre-loaded effect and harvested for their unique springs- now available for purchase on their own!

These gold-plated extra long uniform springs feel remarkably snappy and responsive while remaining true to their weighting. That’s because of a tighter mid-coil, which, unlike regular springs, create an even feel during compression.

Their elongated spring length and wider diameter also maximizes the travel distance of the stem, keeping it seated in place at the top of the housing- further reducing stem wobble.

Want a closer look? Check out our comparison photos against similarly weighted springs.

Try them with your favorite switches. They’re great with linears and even better with tactiles.

Specs:

19.3mm length

4.0mm diameter

Comes in 62g or 67g as packs of 100

Note:

Weightings reflect bottom out force and may vary slightly. Please note that springs may arrive tangled. We recommend you exercise caution with detangling them. We won't be responsible for destroyed springs!

Its the V2 one. We never got a v1, but apparently people need to know.

Dress up your next keyboard build with this set of premium keyboard stabilizers from Owlabs! Or- Owlstabs, owlstab (wink)?

These stabs have a special 'liquid metal' wire that allows it to stay straight so you don't have to worry about balancing your wires.

Each stabilizer set includes (covers TKL):

• 4 sets of 2U stabilizers
• 1 set of spacebar stabilizers with 2 wires supporting 6.25U and 7U configurations
• 10 Teflon stabilizer dampening pads

3D printed switch opener. Opens ONLY MX style switches. Colors are random.

Current Revision 1.3 (2021-07-12)

Update 1.3 (2021-07-12):

• Updated tolerances.
• New Lower-profile for letter mail height.

Update 1.2 (2021-02-04):

• Otemu tops now pop out easier, angle revision

Update 1.1 (2020-11-10):

• Issue with switches being too tight fixed

Now a 100% original design, printed with maximum strength as a 3D printed product.

 

 

 

From DrewKeys:

New Films are here!

120x per pack!

 
What's the difference?: 

These new films are now die-cut and ordered through a manufacturer rather than being home-made in my (DrewKeys) garage. Dimensions are tighter, more accurate, and generally look more aesthetically pleasing. Compression ratios are better, as the material is softer than before. They now ship in easy to peel sheets rather than all in a single bag. (Check the video link!) 
https://www.youtube.com/watch?v=fSjxzWGLDBs

Compatibility:

Fits all switches meant for thicker films! (Cherry, Gateron, JWK's, etc. all good) 

Description:

One of the (if not the most) thickest switch film that still perfectly fits the majority of switches due to the compression of the rubber silicone material. Comes in 4x5 sheets packaged in resealable bag. 

 

Installation:
I find putting the switch films on the top housing makes it easier to apply than to put it traditionally on the bottom housing. There should be two tiny bumps on the top housing on the side where the leaf would be. Make sure the films are between the two bumps and the top housing legs! Once you've put the films in this way, they should be perfectly be aligned.

The Peach Bag - by Sandy.

Switches NOT included.
Each purchase comes as a pack of 20. We are not selling singles.

The Peach Bag is a frosted pouch, suitable for storing switches. Its made as a 3.5mil thick plastic bag (much thicker than our default bags that used in shipping switches from our store for example). It can also stand up so you can store the bag vertically to display your collection.

If you are looking for a cost effective way to store your switches, look no further.

IF REQUESTED: when purchased with switches, we can pack them into the bags.

Specs:

Size: 12.5 x 20.3 cm

Thickness: 90 micron or 3.5mil

Looks: Peach/10

Holds: 110 switches

BNR1 is an CNC machined rotary encoder knob designed by Binepad manufactured using a solid rod of aluminum. The encoder can be configured via QMK to do just about anything.

B Stock:

B stock items will have some cosmetic defects. Hence, their B stock pricing.

Dates:  14th March - 29th March

THIS IS A GROUP BUY ITEM. DO NOT ORDER THIS WITH OTHER ITEMS.

What can the BNR1 do?

• Audio volume
• Scrolling
• Tabbing
• Window movement
• History scrubbing
• Undo or redo 
  
• Horizontal scrolling
  
• And many more !

Product Dimensions:

• 48 x 48 x 46.30 mm

Each unit contains one (1) set of stabilizers including:

• 4 x 2U stabilizer units 
• 1 x 6.25U stabilizer units 
• 1 x 7U stabilizer units

Stabilizer units include 2 housings and 1 wire each.

*please note the photo does not show the extra 2u wire*

Specifications:

• Manufactured by Cherry corp
• Mounting Type: PCB-Mounted
• Mounting Style: Clip-in

EV-01 Linear Switch R2 Group Buy Linear Switch By JWK.

1 Order = 10 Switches

• Top Housing: PC

• Stem: POM

• Bottom Housing: Nylon

• 63.5g Gold Plated Spring

• Polished internals, Latest V2 molds, unlubed from factory

Estimated Shipping: Q4 2021

Vendors:

NA: bespoke.keys

CA: Keyspresso

EU: KEYGEM

UK: Proto[Typist]

SEA/ASIA: Kibou.store

Store your deskmat in this compact drawstring bag. These deskmat bags keep your deskmats dust-free and allow your deskmats to be stacked and stored horizontally and vertically.