Acrylic Lube Stations

Regular price $12.99
/
Shipping calculated at checkout.

These lube stations are made of clear acrylic and are available in three sizes to fit your needs.

Features:

  • All of the lube stations feature cutouts for your springs, stems, and switch housings.
  • Four metal feet elevate the lube stations.
  • Cutouts allow brushes of any size to stand while not in use.
  • A smaller acrylic panel secured underneath the spring and stem area ensures that your springs don't fall through.
  • (Tray Version only) Metal tin included to hold parts.
  • (Tray Version only) Strong magnet helps prevent metal parts such as screws and springs from escaping the lube station area.

Small Lube Station

Included in the kit:

  • 4 x screw-in leg pins
  • 4 x small screws
  • 4 x screw nuts
  • 1 x acrylic piece with cutouts (supports 20 switches)
  • 1 x acrylic bottom piece 

Medium Lube Station

Included in the kit:

  • 4 x screw-in leg pins
  • 4 x small screws
  • 4 x screw nuts
  • 1 x acrylic piece with cutouts (supports 36 switches)
  • 1 x acrylic bottom piece

Tray Version Lube Station

Included in the kit:

  • 1 x metal tin
  • 1 x super strong magnet
  • 4 x screw-in leg pins
  • 4 x small screws
  • 4 x screw nuts
  • 1 x acrylic piece with cutouts (supports 28 switches)
  • 1 x acrylic bottom piece 

Assembly Directions

  1. Remove the cover film from the main acrylic body and the small acrylic piece.
  2. Orient the lube station so that the long side with + and o cutouts is facing south.
  3. Screw the large leg pins onto the main acrylic body in the four corners.
  4. Position the small acrylic piece under the main acrylic body, under the bottom half area where the + and o cutouts are located.
  5. Screw the small acrylic piece and the main acrylic body together. There are 4 holes in the corners for the screws.
  6. (For Tray Version Only) Remove the magnet from the metal tray. Insert the magnet into the rectangular shape cutout in the right bottom corner.
  7. (For Tray Version Only) Insert the metal tray into the rectangular cutout in the top right corner rectangle.

Your lube station is now ready for use!