These premium brushes are made for long-term use and won’t fall apart halfway through a lube job. The grip is specially designed for comfort and the thin tips allow for precise and even lube application on switch parts.
As a best practice, we recommend using a separate brush for each type of lube to avoid mixing and contamination.
Round brushes are great for beginners and those who want very fine control over lubing.
Flat brushes are great for those who have great hand control and want the ability to apply more coverage with less work for specific surfaces.
A clean alternative to the popular "band-aid" mod. These stabilizer pads will dampen the sound of your stabilizers hitting your PCB. They will also help to even out stabilizer noise caused by PCB holes.
Each unit comes with 20 stabilizer pads. Available in two materials: silicone (clear) and Teflon fiber (black)
Remove one pad from the set.
Put the pad between two stabilizer holes.
Install your stabilizers onto the PCB as usual, ensuring the stabilizer housing covers the pad.
Screw in or clip in your stabilizer housing.
Compatible with both plate mount and PCB mount stabilizers, though we recommended them for PCB mount stabilizers since they make contact with the PCB.
These new films are now die-cut and ordered through a manufacturer rather than being home-made in my (DrewKeys) garage. Dimensions are tighter, more accurate, and generally look more aesthetically pleasing. Compression ratios are better, as the material is softer than before. They now ship in easy to peel sheets rather than all in a single bag. (Check the video link!) https://www.youtube.com/watch?v=fSjxzWGLDBs
Fits all switches meant for thicker films! (Cherry, Gateron, JWK's, etc. all good)
One of the (if not the most) thickest switch film that still perfectly fits the majority of switches due to the compression of the rubber silicone material. Comes in 4x5 sheets packaged in resealable bag.
Installation: I findputting the switch films on the top housing makes it easier to applythan to put it traditionally on the bottom housing. There should be two tiny bumps on the top housing on the side where the leaf would be.Make sure the films are between the two bumps and the top housing legs!Once you've put the films in this way, they should be perfectly be aligned.
Switches NOT included. Each purchase comes as a pack of 20. We are not selling singles.
The Peach Bag is a frosted pouch, suitable for storing switches. Its made as a 3.5mil thick plastic bag (much thicker than our default bags that used in shipping switches from our store for example). It can also stand up so you can store the bag vertically to display your collection.
If you are looking for a cost effective way to store your switches, look no further.
IF REQUESTED: when purchased with switches, we can pack them into the bags.
If OpBlacks weren't colourful enough for you, 43Studio is bringing you new variant of them- Popus! Not quite pink and not quite purple, Popus are meant to play well with a variety of anodizations and colours while keeping the thocky smoothness OpBlacks are known for.
This service charge is a deposit for build services. Do not purchase this item unless you intend to purchase build services.
READ CAREFULLY. Your deposit charge will be deducted from your final invoice upon the completion of build services. Your final total charges for services cannot be charged before the work is complete. Please refer to our Build Services page for more information.
Failure to follow the directions may lead to a refund and incur a 3.5% payment processing fee.
BUILD SERVICE DIRECTIONS:
Select your service for purchase
Add the parts (stabilizers, sockets, switches) you will need for your service. If you add parts, please leave a note on checkout that you want us to apply the service to the items in your order.
Check the e-mail for the address to ship or drop off your items to
Drop off or ship your items. Include your order number and return address. For example, if you purchased Build Services, you will receive an order number via email. The e-mail will include a n order number (eg #9648). Add this to the your shipping address.
Wait for the service to be completed.
You will receive your final invoice with the deposit amount deducted.
Select your shipping method and pay your invoice.
Enjoy your build!
If you need help due to checkout issues, please contact us and we can send you a custom invoice.
Buttery smooth linear switches- in your favourite colours!
Introducing the Cow line of linear switches! These smooth, frictionless switches (courtesy of UHMWPE stems) switches are available in four (4!!) different colourway variations: bubblegum pink, orchid purple, cottonball white, and sorbet orange.
Can't pick a colour? Mix it up- all of the switches share a midweight 63.5g spring.
Need your springs sorted? Purchase here for your springs to be gently separated and sorted into one of our spring keepers.
NOTE: YOU MUST BUY THIS ONLY IF YOUR ORDER INCLUDES SPRINGS + SPRING KEEPER. Failure to do so by not reading this means I will not refund this service purchase. If you do not have both items in your order, I will charge you for it.
The SP Star line of tactile switches need no introduction. These switches are well-reviewed by many members of the community- and are a favourite among our team!
Polaris Purples are appropriately tactile with bumps significant enough for a real tactile feel, and very smooth. You can still choose to lube and film these switches if you want, but they are also perfectly fine stock!
Material: POM stem, PC housing
Spring Weight: 67g
5 pin PCB Mount
Each unit purchased includes 10 switches
These come with a mid-weight 67g spring. They are compatible with the range of springs we sell if you would like to tailor your typing experience.