Switches

Premium Lubing Brushes

Sizes:

• Round - Size 0 or Size 2.
• Flat - Size 1. 

These premium brushes are made for long-term use and won’t fall apart halfway through a lube job. The grip is specially designed for comfort and the thin tips allow for precise and even lube application on switch parts.

As a best practice, we recommend using a separate brush for each type of lube to avoid mixing and contamination.

Round brushes are great for beginners and those who want very fine control over lubing.

Flat brushes are great for those who have great hand control and want the ability to apply more coverage with less work for specific surfaces.

3D printed switch opener. Opens both 'Cherry-MX' and 'Kailh' style switches.

Current Revision 1.4 (2021-07-12)

Update 1.4 (2021-07-12):

• Updated tolerances
  
• New low-profile size for letter mail shipping

Update 1.3 (2021-03-22):

• Fixed an issue with kailh side spacing

Update 1.2 (2021-02-04):

• Otemu tops now pop out easier, angle revision

Update 1.1 (2020-11-10):

• Issue with switches being too tight fixed

Now a 100% original design, printed with maximum strength as a 3D printed product.

 

 

Pickup and hold your stem (or gems) without getting lube on your fingers.

Springs from ThicThock. Packs of 100.
Comes in
DL - Deliciously Linear (62g, 65g, 58.5g, 55g*)
MP - Magically Progressive (64g, 68g)

MP's were originally found in the beloved marshmallow switches. Now they are available on their own- so you can experience the same fluffy feel in a switch housing of your choice!
MP - means progressive, which increases in force as you press down on the switch. This encourages the user from bottoming out. Creating a unique typing experience.

Thic Thock Springs are meticulously designed and manufactured custom mechanical keyboard springs; aiming at providing the best quality spring at a reasonable and friendly price point.

The weight variation of each spring is controlled within 2±gf. In order to maximize the customer experience, we've decided to make these amazing springs with premium custom materials: a high grade custom material imported from Japan. The structure of the spring will be firmer and more flexible, resulting in a more bouncier feel and better overall typing experience. That are specifically used for supreme user experience.

*55g springs don't have the sticker label.

*Foo dog gacha not included*

HTV + PC switch films by Kelowna. 

These switch films help reduce housing wobble and rattle between top and bottom housing. 
Info: 

• Has orientation, shiny side up for best effect.
• 0.15mm
• Comes in packs of 120.
• Especially great for JWK switches

Thick metal switch puller. Used to remove switches from hot-swap PCB's or after desoldering.

THE PEACH BAG (pictured) not included. Purchased separately.

Extras - These are currently in-stock until stock is depleted.

'Frosties' Giant V4 Linear Switch 

Jan 3 - Jan 24 est delivery end March

Introducing the Giant V4 switch - recolored from V3 (JWK; the same manufacturer as the popular Alpaca switches)- with a lighter weighted extra long gold-plated spring.

The longer spring inside the housing will become essentially 'pre-loaded', reducing the difference between actuation and bottom out. 

Comes as 58g gold plated spring weights.

Each order is 10 Switches

DO NOT ORDER THIS WITH OTHER ITEMS.

Specifications: 

- Top Housing - PC
- Bottom Housing - Nylon 
- Stem - POM 
- gold plated spring extra long spring.
- no factory pre-lube 
- 5pin pcb mount

NOTE: 
This is a Group Buy, and Group Buy terms and conditions apply. The estimated date of delivery is just that - an estimate. Delays and setbacks may occur. Upon purchase, you will be charged immediately. And by purchasing this item, you acknowledge everything stated above. There are no refunds or cancellations for this order.  For more information, check out our FAQ

A favorite from the Giant series of switches, known for their great pre-loaded effect and harvested for their unique springs- now available for purchase on their own!

These gold-plated extra long uniform springs feel remarkably snappy and responsive while remaining true to their weighting. That’s because of a tighter mid-coil, which, unlike regular springs, create an even feel during compression.

Their elongated spring length and wider diameter also maximizes the travel distance of the stem, keeping it seated in place at the top of the housing- further reducing stem wobble.

Want a closer look? Check out our comparison photos against similarly weighted springs.

Try them with your favorite switches. They’re great with linears and even better with tactiles.

Specs:

19.3mm length

4.0mm diameter

Comes in 62g or 67g as packs of 100

Note:

Weightings reflect bottom out force and may vary slightly. Please note that springs may arrive tangled. We recommend you exercise caution with detangling them. We won't be responsible for destroyed springs!

Its Tribosys 3204, produced by Miller-Stephenson. 
Primarily a lower viscosity switch lubricant that is considered a excellent choice for tactile switches.

Very similar to 204g0 but with more name recognition.

Will naturally separate when stored, will remain stable in surface-to-surface contact. Stir before use.

Data/Safety Sheets available on request.

MDI (or EVA) switch films by Kelowna. 

These switch films help reduce housing wobble and rattle between top and bottom housing. 

At 0.3mm these are  much thicker than your standard 0.15mm films. Made with MDI (EVA) foam. Made for those who like to get a slightly deeper pitch on switches.
Info: 

• 0.3mm
  
• Comes in packs of 120.
• Especially great for JWK switches (to lower pitch)

3D printed switch opener. Opens ONLY MX style switches. Colors are random.

Current Revision 1.3 (2021-07-12)

Update 1.3 (2021-07-12):

• Updated tolerances.
• New Lower-profile for letter mail height.

Update 1.2 (2021-02-04):

• Otemu tops now pop out easier, angle revision

Update 1.1 (2020-11-10):

• Issue with switches being too tight fixed

Now a 100% original design, printed with maximum strength as a 3D printed product.

 

 

 

The Peach Bag - by Sandy.

Switches NOT included.
Each purchase comes as a pack of 20. We are not selling singles.

The Peach Bag is a frosted pouch, suitable for storing switches. Its made as a 3.5mil thick plastic bag (much thicker than our default bags that used in shipping switches from our store for example). It can also stand up so you can store the bag vertically to display your collection.

If you are looking for a cost effective way to store your switches, look no further.

IF REQUESTED: when purchased with switches, we can pack them into the bags.

Specs:

Size: 12.5 x 20.3 cm

Thickness: 90 micron or 3.5mil

Looks: Peach/10

Holds: 110 switches

From DrewKeys:

New Films are here!

120x per pack!

 
What's the difference?: 

These new films are now die-cut and ordered through a manufacturer rather than being home-made in my (DrewKeys) garage. Dimensions are tighter, more accurate, and generally look more aesthetically pleasing. Compression ratios are better, as the material is softer than before. They now ship in easy to peel sheets rather than all in a single bag. (Check the video link!) 
https://www.youtube.com/watch?v=fSjxzWGLDBs

Compatibility:

Fits all switches meant for thicker films! (Cherry, Gateron, JWK's, etc. all good) 

Description:

One of the (if not the most) thickest switch film that still perfectly fits the majority of switches due to the compression of the rubber silicone material. Comes in 4x5 sheets packaged in resealable bag. 

 

Installation:
I find putting the switch films on the top housing makes it easier to apply than to put it traditionally on the bottom housing. There should be two tiny bumps on the top housing on the side where the leaf would be. Make sure the films are between the two bumps and the top housing legs! Once you've put the films in this way, they should be perfectly be aligned.

These lube palettes are useful for spreading and applying lubricants to your brushes, and for preventing your lubricants from contacting deskmats and other surfaces. They are also useful for keeping small parts in one place as you are building your keyboards. A clear flat top prevents contents from contacting dust, and keeps contents in the tray. Trays are also stackable.

Each unit purchased includes 2 palette trays and 4 bumpons per palette. 

Complete your build station with our spring keepers. 

Note:

For Lettermail orders, do not order this product with other products since they may not fit into the Lettermail box.

• These dual aluminum switch openers support both Kailh and MX style switches.
• The cat-shaped cutout is made specially to support switches with long pins.
• Each half includes magnets to create one compact unit.
• Key hole allows you to also clip these openers to your kit and take them on the go!
• Available in three colourways.

Crocheted with love from us to you. These cozies are made locally in small batches and are currently available in select colours: Pastel Pink and Navy Blue.

Specifications:

• Each cozie holds 110 switches
• Secured snugly with a drawstring
• Made in Canada