Premium Products

Krytox™ GPL 205g0 is high viscosity lubricating grease. Approximately 5ml. 

Enough for around 400 switches.

Please note that all lubricant purchases are non-returnable & non-refundable once the sale is final.

Please note that this is a industrial product. Keyspresso is not responsible for any damages from inexperienced usage. Please do not ingest or leave on skin.

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

A heavy viscosity and heat-resistant grease.

Great for lubricating stabilizers. Not recommended for switches.

From the manufacturer:

XHT-BDZ is the highest viscosity grease in the XHT-BD Series. Krytox XHT-BD greases are designed for use where the temperatures are in the 288 °C (500 °F) range and higher, where there is a danger of melting the standard PTFE thickener. This grease uses a special non-melting high temperature thickener. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox XHT-BD greases are for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 330 °C (626 °F), and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life.